MARINE EPOXY ADHESIVES

Flexible, tough and non-corrosive. Sticks and cures under water. Use on PVC, fiberglass, wood, metal, acrylic, fabrics, ceramics, masonry and more. Can be applied to wet or dry surfaces. 1800 psi super high strength. Sandable and paintable.

For emergency repairs in salt or fresh water, for improved resistance to moisture. Suited for repairs to boats, water and stock tanks, fish boxes, spas and tubs, downspouts and gutters. Cures wet, dry or in water in pools, fiberglass and bath fixtures. Hand mixed with 15-20 minute working time. Cures in 60 minutes. May be shaped, drilled, sanded, sawed, filed and painted. Nonconductive with -20 to 300 degrees Fahrenheit (-29 to 150 degrees Celsius) temperature range when cured. No sag, no drip. Resistant to hydrocarbons, ketones, alcohols, esters, aqueous salt solutions, halocarbons, and dilute acids and bases. 700 psi tensil shear strength. 75 hardness shore D after 1 week of curing. Packed in resealable, air-tight plastic cylinder.

Cures wet, dry or underwater. Use as an adhesive with wood, metals, glass, brick, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, gas liners, pressure tanks, plumbing, swimming pools, cellars, drains, underwater lights and stock tanks; filler for holes, castings, patterns, molds, voids and welds. Normally no vice or clamp needed. 30-40 minute working time at 70 degrees Fahrenheit. 90 minutes tack free, overnight for service, 1-2 weeks for max cure time. Nonconductive, -20 to 200 degrees Fahrenheit temperature range. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. 1,710 psi tensile shear strength. 72 hardness shore D after 1 week of curing.

Cures wet, dry or underwater. Use as an adhesive with wood, metals, glass, brick, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, gas liners, pressure tanks, plumbing, swimming pools, cellars, drains, underwater lights and stock tanks; filler for holes, castings, patterns, molds, voids and welds. Normally no vice or clamp needed. 30-40 minute working time at 70 degrees Fahrenheit. 90 minutes tack free, overnight for service, 1-2 weeks for max cure time. Nonconductive, -20 to 200 degrees Fahrenheit temperature range. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. 1,710 psi tensile shear strength. 72 hardness shore D after 1 week of curing.

Cures wet, dry or underwater. Use as an adhesive with wood, metals, glass, brick, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, gas liners, pressure tanks, plumbing, swimming pools, cellars, drains, underwater lights and stock tanks; filler for holes, castings, patterns, molds, voids and welds. Normally no vice or clamp needed. 30-40 minute working time at 70 degrees Fahrenheit. 90 minutes tack free, overnight for service, 1-2 weeks for max cure time. Nonconductive, -20 to 200 degrees Fahrenheit temperature range. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. 1,710 psi tensile shear strength. 72 hardness shore D after 1 week of curing.